Publicité
symbol " " twinkles, press " "or " " to set the system time.
After choosing the time , lift the finger off the buttons and wait
for 5 seconds, then decimal point symbol " " stop twinkling.
It means time is well set. Like pic 8.Whenever user wants to set
the time again, In the status of pic 7, push "
" one time,
when user sees decimal point symbol " " twinkles, then can
set the time again.
Pic 6 Clock setting state diagram
Pic 7 Feature to be selected state diagram
(second icon flickering)
(second icon always bright)
Press button"
" again for 3 seconds, oven is turned off and
returns to standby status. The display of pic 6 is flashing.
Pic 8 System time well set diagram
Note 1：System time setting range is 0：00-23：59.
Note 2：When setting the time for each function of the timer,
you can set the time by short press or long press " " and
" ",short press will add 1 minute or reduce 1 minute each
press of the button, while long press will quickly increase or
decrease the time by 1 minute, so it can set the time fast.
4.3 Alarm clock setting function
www.linarie.com.au
23
Publicité
