Publicité
Adjustment
Height adjustment:
The height is easily adjusted by inserting the bolt in the
required position. See distances in the technical data
section. Check that both sides have been adjusted to
the same height.
Arm supports:
The height of the arm supports and/or width between the arm supports can be adjusted. Loosen the screws,
twist the support to the desired position and retighten the screws. Then loosen and refit the arm support plate in
the correct position. Swift Mobil Tilt-2 XL is delivered with the arm supports mounted in the most inward position
(seat width 48 cm).
Fit the gas piston in position A to tilt the seat at angles from -5° to 30°
Fit the gas piston in position B to tilt the seat at angles from 0° to 35°
Foot support:
Various height adjustment options are available by moving the locking pin. The leg supports have 6 different height
settings. If the user's feet are at risk of slipping backwards, heel straps are recommended.
User brake
Service and maintenance
Clean the device using a standard non-abrasive cleaning
agent (pH between 5 and 9). Rinse and dry.
Disinfect the device with 70% disinfectant solution.
The device requires no other maintenance.
The device and its accessories can be safely cleaned
at 85°C for 3 minutes (unless otherwise stated). This
applies to reconditioning.
Constituent materials are resistant to common
disinfectants.
Transport, storage and disposal
Storage
The device should be stored indoors in a dry place at a
temperature above 5°C. If the device has been stored
for a long time (more than four months), its function
must be checked by an expert before use.
Do not use the chair if the height adjustment bolt is
unlocked. Risk of injury.
E1-E7
The following surface treatment methods have been
used to protect against corrosion:
Lacquered surfaces = Polyester powder coating
Non-lacquered steel surfaces = Fe/Zn-Ni
5-year guarantee against material and manufacturing
defects. For terms and conditions, see www.etac.com.
19
Etac / Swift Mobil-2 / www.etac.com
See figure E
E8
E9
E10
E11
E12
en
Publicité
