Attaching The Cables - Stihl MH 700 Notice D'emploi

English
► Tighten nuts (13) to 20 Nm to 25 Nm.
Upper handlebar (9) is locked in place.
The handlebar must not be dismantled again.
► Insert cables and wiring harness (13) in clip (14).
► Fasten the cables to the handlebar at regular intervals
using cable ties (15), making sure that none of the cables
are kinked or damaged.
6.6

Attaching the Cables

Attaching the self-propulsion cable
► Insert self-propulsion cable (1) through lever (2).
► Fit washer (3).
► Screw on nut (4).
► Attach spring (5) to holder (6).
58
Securing the throttle cable
► Secure throttle cable (10) using cable clip (11).
Securing the cable
► Secure cable (12) using cable clip (13).
► Secure cable conduit (14) using cable clip (15).
6 Assembling the Cultivator
0478-404-9604-A