6. Clean, wipe, and dry thoroughly.
7. Take out all removable parts, wrap them well, and tape them
together so they don't shift and rattle during the move.
8. Depending on the model, raise the front of the refrigerator so it
rolls more easily or raise the leveling screws so they don't
scrape the floor. See online "Adjust the Door(s)" or "Door
Closing and Door Alignment."
9. Tape the doors closed and tape the power cord to the back of
the refrigerator.
When you get to your new home, put everything back and refer to
"Installation Instructions" for preparation instructions. If your
refrigerator has an automatic ice maker, remember to reconnect
the water supply to the refrigerator.
Sabbath Mode Instructions
Your refrigerator is equipped with the Sabbath Mode feature,
which is designed for those whose religious observances require
turning off the lights and ice maker.
By selecting this feature:
� The temperature setpoints settings remain unchanged.
� LEDs from the electronic controls will not display.
� The Sabbath button will be the only light displayed.
� No alarm will ring.
� Interior lights will turn off.
� The product will not change its behavior by opening the door.
For the most efficient refrigerator operation, it is recommended to
exit Sabbath mode when it is no longer required.
To fully activate Sabbath Mode, you must follow the instructions
on the control panel.
CONTROL PANEL
To activate Sabbath mode:
1. Choose "settings icon" in the main screen.
2. Scroll to the right and locate the "Sabbath Mode Icon" on the
second screen (top right). Select the icon.
3. A new screen will appear asking if you want the Sabbath
Mode On or Off. Choose "ON".
4. A new screen will appear asking if you want Sabbath Mode
On, Yes or NO. Choose "Yes".
The product will enter Sabbath Mode.
To deactivate Sabbath mode:
1. Touch the main screen. It should have "Sabbath Mode" written
on it.
2. A new screen will appear asking Sabbath Mode On or Off,
Choose Off.
3. The Sabbath Mode is deactivated and the product will re-start.
Refrigerator Drawers and Shelves
Remove and Replace Drawers (for safety
reason the removal of drawers is possible
only with tools)
Depending on the width of your door opening, it may be necessary
to remove the Freezer drawer front to move the refrigerator into
your home.
Remove Drawers
1. Freezer Drawers are tightened to slide guide with two
thumbscrews.
2. Open Freezer drawers to its full extension.
3. Loosen the two thumbscrews.
4. Lift up on the drawer front to release the clips from the drawer
slide guide bracket slots.
5. Slide the drawer slide guides back into the freezer.
Replace Drawers
1. Pull out the drawer slide guides to their full extension.
2. Holding drawers front by its sides, align and insert the clips in
the drawer guide bracket slots.
NOTE: It helps if one person holds the drawer slide guides
steady while another person aligns the drawer front and
inserts the clips into the slots.
3. Replace and tighten the two thumbscrews.
Remove and Replace Ice Tray
Ice tray is located in upper drawer of the freezer compartment.
To remove ice tray:
1. Pull out the upper drawer from the freezer compartment.
2. Ice tray is attached with locking panels.
3. Take out the ice tray by removing locking panels.
5