Selve SE Pro Notice De Réglage page 29

Setting of the end positions
4.4. Setting of the end positions with setting switch/switch
When connecting the setting switch for motors, consider the following:
Caution! Risk of injury through an electric shock!
Connection only when de-energised!
Warning!
The 4 wires in the setting switch cable must be connected to the motor wiring cable
according to their colours.
PE = yellow-green
N = blue
UP = brown
DOWN = black
4.5. Selection table for settings:
Setup-mode/end positions in operation
Automatic setup-mode
bottom position, top stop/release
Manual setup-mode
bottom position, top position
Manual setup-mode
bottom position, top stop/release
LED indicates connection in correct phase sequence
Pushbutton E is the setting pushbutton
Pushbutton for moving the motor up and down
Setting switch
4.5.1. (page 30)
4.5.2. (page 31)
4.5.3. (page 32)
29
GB
Switch
4.5.1. (page 30)
–
–
GB