Selve SE Pro Notice De Réglage page 20

GB Safety instructions
1. Safety instructions
Important safety notes for installation and operation!
For safety of persons, it is important to observe the
Warning!
instructions, since wrong operation and installation
may cause severe injury. The instructions must be
kept.
• Consider the following:
· Relevant laws, standards and instructions
· Country-specific terms
· The specifications of the local energy providers and stipula-
tions for damp rooms pursuant to VDE 0100
· The safety instructions of DIN EN 60335
· The state of the technology at the time of installation
· This instruction manual and any operating instructions for
connected components
• This motor must only be connected by authorised specialists.
For installation and maintenance the system has to be de-
energised.
• For the motor installation, a mains supply circuit break with at
least 3 mm contact opening width per pole must be pro vided
(DIN EN 60335). Safety measures against inadvertent activation
must be in place.
• Before installation of the motor, all cables not needed must be
removed and any facility that is not required for operation with
power must be put out of operation.
• This instruction manual is part of the device and the warranty
conditions. It has to be handed out to the electrician and oper-
ator.
20