Dolmar TM-92.14-H Manuel D'utilisation page 62

EN 10
3.2 FITTING THE STEERING WHEEL
Put the machine on a flat surface and
straighten up the front wheels.
Fit the steering wheel (1) onto the pro-
truding shaft (2) with the spokes directed
towards the seat.
Line up the hole in the steering wheel hub
with the hole in the shaft and insert the
pin supplied (3) using a hammer, ensuring
that the end comes completely through
to the opposite side.
NOTE
screw-driver of the same size as the pin when hammering it in the last part.
3.3 FITTING THE SEAT
Fit the seat (1) onto the plate (2) using the
screws (3).
To avoid damaging the steering wheel, use a punch or a
UNPACKING AND ASSEMBLY
2
3 3
2 3 1
1