Publicité
Les langues disponibles
Les langues disponibles
come into contact with hidden wiring.
Contact with a live wire can also cause
a charge in metal parts of the device
and result in an electric shock.
• Fasten and secure the workpiece by
means of clamps or with another
method on a stable underground. If
you hold the workpiece only with your
hand or against your own body, it will
stay instable and this can lead to a loss
of control.
• Do not use any accessories that are not
recommended by PARKSIDE. This can
result in electric shock or fire.
Observe the safety informa-
tion and notes on charging
and proper use as shown in
the instruction manual for
your battery and charger from
the Parkside X 12 V Team se-
ries. A detailed description of
the charging process and fur-
ther information can be found
in the separate operating in-
structions.
Additional safety
instructions for sabre saws
• Keep hands away from the sawing
area. Do not reach underneath the
workpiece. Upon contact with the
blade there is a risk of injury.
• Move the power tool against the work-
piece only when it is turned on. Other-
wise, there is a risk of kickback if the
attachment tools jam in the workpiece.
• Make sure that the footplate is secure
during sawing. A tilted saw blade may
break or cause a kickback.
• After you have finished work, turn the
power tool off and do not pull the saw
blade out of the cut until it has come to
a standstill. In this way you will avoid
any kickback and can safely put down
the power tool.
• Use only undamaged saw blades in
perfect condition. Bent or blunt blades
can break, adversely affect the cut or
cause kickback.
• Do not brake the saw blade after
switching the device off by applying
side pressure. The saw blade may be
damaged, break or cause a kickback.
• Use suitable detectors in order to find
hidden supply lines or consult the local
utility company.
Contact with electric cables can lead to
fire and electric shock.
Damage to a gas pipe can cause an
explosion. Penetration into a water line
causes property damage.
• Secure the workpiece. A workpiece
that is retained with clamping appli-
ances or a vice is held more securely
than with your hand.
• Wait until the power tool has stopped
before placing it down. The attachment
tools can jam and lead to a loss of con-
trol over the power tool.
Residual risks
Even if properly operating and handling this
electric tool, some residual risks will remain.
Due to its construction and build, this elec-
tric tool may present the following hazards:
a) Cuts
b) Ear damage if working without ear pro-
tection.
c) Damage to your health caused by
swinging your hands and arms when
operating the appliance for longer pe-
riods of time or if the unit is not held or
maintained properly.
GB
IE
27
Publicité
