Publicité
Les langues disponibles
Les langues disponibles
GB
IE
Warning! During operation, this
electric tool generates an electro-
magnetic field which, under certain
circumstances, may impair the func-
tionality of active or passive medical
implants. To reduce the risk of seri-
ous or lethal injuries, we recommend
that persons with medical implants
consult their doctor and the manu-
facturer of their medical implant
before operating the machine.
Assembly
Only insert the battery once
the battery-operated tool is
fully ready for use.
Attaching/removing the
protective cover
Attaching the protective cover
1. Press the two holders on the protective
cover (13) into the recesses on the ap-
pliance housing. The protective cover
(13) locks into place.
You can fold the fitted protective
cover (13) up by 90°.
Removing the protective cover
2. Carefully press the two holders on the
protective cover (13) apart.
3. Pull the protective cover (13) to the
front.
Assembling/removing
the slide shoe
When working on scratch-sensitive work-
pieces, working with the slide shoe (5) is
recommended.
28
Attaching the slide shoe
1. Place the shoe (5) on the front of the
bottom plate (4).
2. Now, press the notches (5a) on the
back of the slide shoe over the base-
plate (4).
Removing the slide shoe
1. Press the slide shoe (5) on the notches
(5a) from the baseplate (4).
2. Pull the slide shoe (5) forward, away
from the baseplate (4).
Removing/inserting the
rechargeable battery
1. To remove the battery (23) from the
device, press the release button (24) on
the battery and pull the battery (23) out.
2. To insert the battery (23), push the bat-
tery (23) along the guide rail into the
device. You will hear it click into place.
Only insert the battery once
the battery-operated tool is
fully ready for use.
Checking the
charge status of the
rechargeable battery
The battery charge indicator (3) signalises
the state of charge of the battery (23)
when the device is in operation.
3 LEDs light up (red, orange and green):
Battery is fully charged.
2 LEDs light up (red and orange):
Battery has a residual charge.
1 LED lights up (red):
Battery has to be charged
Only charge the battery (23) when
the red LED on the charge status
indicator (3) is on.
Publicité
