SilverCrest 341821 2001 Mode D'emploi page 54

Preparing cappuccino
1) Ensure that there is enough water in the water tank z. Add more water if
necessary.
2) Ensure that there is enough milk in the milk tank 6. Add more milk if necessary.
3) Select whether you want prepare a cappuccino with a single or double
espresso and fit the corresponding espresso sieve s d in the sieve holder
p.
4) Add the espresso powder to the espresso sieve s d and fit the sieve
holder p.
5) Place a suitable cup on the drip grille 8. Depending on the size of the cup,
you may also want to pull out the tray for small cups 9 and place the cup
on this.
6) Set the milk nozzle 0 so that it is pointing into the cup.
7) Use the "Milk quantity" knob 5 to set how much milk you want to use for
your cappuccino:
Turn the "Milk quantity" knob 5 to the left to reduce the amount of milk. Turn
the "Milk quantity" knob 5 to the right to increase the amount of milk. Make
sure you do not turn the knob further than the " " marking. Otherwise you
will be in cleaning mode (see section "Cleaning and care").
NOTE
► You can even correct the amount of milk during preparation by turning the
"Milk quantity" knob 5.
8) Switch the appliance on using the on/off switch i and wait until all control
lamps light up permanently. The appliance has now heated up.
9) Press the "Small" cappuccino button e
cappuccino. The control lamp for the "Small" cappuccino button e lights up.
Press the "Large" cappuccino button 2
cappuccino. The control lamp for the "Large" cappuccino button 2
lights up.
10) The appliance starts the brewing process; the corresponding control lamp
flashes during the preparation.
11) Wait until the espresso has stopped flowing out of the espresso outlet q,
the milk has stopped flowing out of the milk nozzle 0 and all control lamps
light up. You can now remove your cappuccino.
SEMM 1470 A2
if you want to prepare a single
if you want to prepare a large
GB │ IE │
51 ■