SilverCrest 341821 2001 Mode D'emploi page 50

Setting the milk nozzle
For cappuccino and latte macchiato you will need to adjust the milk nozzle 0
depending on the cup size.
1) Swing the milk nozzle 0 so that it is pointing into the glass/cup. Always
use the milk nozzle lever o to position the milk nozzle 0.
2) Turn the silver attachment on the milk nozzle 0 a little to the rear so that it is
released.
3) Depending on the size of the glass/cup, push the silver attachment on the
milk nozzle 0 downwards a little (or upwards, depending on its previous
position). The milk nozzle 0 should extend down into the glass/cup to
prevent splashes. You can choose between 3 heights.
4) Once you have selected a height, turn the silver attachment on the milk
nozzle 0 back to the front so that it clicks into place and no longer moves.
For the purpose of clarity, the adjustment of the milk nozzle 0 is shown here
with the milk tank 6 removed. There is, however, no need to remove the milk
tank 6 from the appliance if you want to adjust the length of the milk nozzle 0.
SEMM 1470 A2
GB │ IE │
47 ■