SilverCrest 341821 2001 Mode D'emploi page 56

"Small" cappuccino
–
Press and hold the "Small" cappuccino button e
until the pump starts to work. Milk froth comes out of the milk nozzle0.
–
Once the desired quantity of milk froth has been produced, stop milk
froth production by pressing the "Small" cappuccino button e
again. You can set a duration of 5 – 40 seconds.
–
Following the milk froth production, the espresso comes out of the
espresso outlet q to prepare the cappuccino.
–
The next time you prepare a cappuccino using the "Small " cappuccino
button e
output.
"Large" cappuccino
–
Press and hold the "Large" cappuccino button 2
until the pump starts to work. Milk froth comes out of the milk nozzle 0.
–
Once the desired quantity of milk froth has been produced, stop milk
froth production by pressing the "Large" cappuccino button 2
again. You can set a duration of 5 – 70 seconds.
–
Following the milk froth production, the espresso comes out of the
espresso outlet q to prepare the cappuccino.
–
The next time you prepare a cappuccino using the "Large" cappuccino
button 2
output.
Preparing latte macchiato
1) Ensure that there is enough water in the water tank z. Add more water if
necessary.
2) Ensure that there is enough milk in the milk tank 6. Add more milk if necessary.
3) Select whether you want prepare a latte macchiato with a single or double
espresso and fit the corresponding espresso sieve s d in the sieve holder p.
4) Add the espresso powder to the espresso sieve s d and fit the sieve
holder p.
5) Place a suitable cup on the drip grille 8.
6) Set the milk nozzle 0 so that it is pointing into the cup.
SEMM 1470 A2
the newly programmed duration will be used for milk
the newly programmed duration will be used for milk
for about 3 seconds
for about 3 seconds
GB │ IE │
53 ■