Mounting And Removing The Barrier Bar; Mounting And Removing The Deflector - Stihl FSA 130 R Notice D'emploi

6 Assembling the Trimmer
► Fit and tighten down the nuts (7) firmly.
6.2

Mounting and Removing the Barrier Bar

6.2.1 Mounting Loop Handle with Barrier Bar
► Switch off the trimmer and pull the connecting cable plug
out of the socket.
2
1
► Insert nuts (2) in the barrier bar (1) so that the holes line
up.
► Fit the clamp (5) in the loop handle (3).
► Place the loop handle (3) with clamp (4) and barrier bar (4)
on the drive tube (6).
► Hold the clamp (7) against the drive tube (6).
► Insert and tighten down the screws (8).
6.2.2 Removing the Barrier Bar
► Switch off the trimmer and pull the connecting cable plug
out of the socket.
0458-725-9921-A
3 4
5
6
7
8
3
5
6
► Take out the screws (6).
► Remove the barrier bar (1), loop handle (3) and clamps (4
and 5).
► Take the nuts (2) out of the barrier bar (1).
6.3

Mounting and Removing the Deflector

6.3.1 Mounting the Deflector
► Switch off the trimmer and pull the connecting cable plug
out of the socket.
2
► Push the deflector (1) into the guides on the gear housing
as far as stop.
► Insert and tighten down the screws (2) firmly.
English
1
2
4
1
47