LIVARNO LUX HG05047B Instructions De Montage, D'utilisation Et Consignes De Sécurité page 24

Replacing a LED bulb
CAUTION! RISK OF ELECTRIC SHOCK!
To replace the LED bulb
product from the mains circuit. To do this, remove the
fuse or switch off the circuit breaker in the fuse box
(0 setting) (see fig. J).
Allow the product to cool completely.
Rotate and take out the lamp cover
body by hand.
2
Attach the supplied suction cup
bulb , loosen it in anticlockwise and take it out of
15
the lamp body
Attach the supplied suction cup
, place it into the lamp body
15
clockwise (see fig. L).
Remove the suction cup
Place the lamp cover
screw tight by hand (see fig. L + fig. M).
Reinsert the fuse or switch the circuit breaker back on
(see fig. N).
Cleaning and care
Before cleaning, remove the fuse or switch off the
circuit breaker at the fuse box.
Never immerse the product in water or other liquids.
Otherwise the product can be damaged.
Clean the product with a lint-free, slightly moist cloth
and mild cleaning agent.
Re-install the fuse for this circuit or switch on at the
circuit breaker in the fuse box.
24 GB/IE
, first of all disconnect the
15
(see fig. K).
2
.
14
over the lamp body
1
from the lamp
1
on a defective LED
14
on a new LED bulb
14
and tighten it in
2
2
and