Publicité
Never leave the batteries completely discharged for a long time.
In case of alarm visualizations contact the technical assistance.
The Suction Motor Does Not Work
1. Verify that the key switch (1) is in the correct position.
2. Check the charge level of the batteries on the display.
3. Check that the battery connector is correctly plugged in.
4. Check on the display that the starting signal of the suction motor is on.
If the problem persists, please contact the authorized technical assistance.
The Brush Motor Does Not Work
1. Verify that the key switch (1) is in the correct position. Switch the machine off
and on again.
2. Check the charge level of the batteries on the display.
The following checks may be performed by the operator. Any
other service or attempt to service by the operator will void the
FAULT DIAGNOSIS
warranty.
39
Publicité
