Publicité
ASSEMBLY
Strictly follow manufacturer/distributor indications for the maintenance and
recharge of the batteries. All installation and maintenance operations must be
executed by specialized staff, using suitable protection accessories.
Battery Charger
Be sure that the battery recharger is suitable for the installed batteries both for their
capacities and type (lead/acid or GEL or AGM).
In the plastic bag containing the use and maintenance you will find the coupling
connector for the recharger. It must be assembled onto the cables of your
recharger, following the instructions given by the manufacturer.
On-Board Battery Recharger (Optional)
If the machine is equipped with the on-board battery recharger (see under
"OPTIONAL ACCESSORIES") please refer to the manufactures instructions on the
use of the charger. The battery recharger is connected directly to the battery poles.
During the recharging operations a device is activated which does not permit the
machine's functioning. The main cable of the battery recharger has a maximum
length of two meters and must be connected to a single-phase socket type CEE 7/7.
The battery charge level is observed on the display with its respective symbol (see
"VISUALIZATION CONTROLS").
12
Publicité
