Publicité
OPERATION
Emergency Brake
In case of an emergency, an immediate stop can be obtained acting upon the lever
of the emergency and parking brake (1) by lowering it.
On the display will be shown the emergency brake activation together with its
symbol.
This immediately stops the machine and all of the functions. The emergency brake
functions also as a parking brake. To start work again, release the lever by pressing
the parking button on the lever itself and activate the levers drive control.
Adjustment Of The Brush Pressure
Through the register (1) it is possible to adjust the brush pressure on the surface.
By turning the knob clockwise the pressure increases, rotating it counterclockwise,
the pressure decreases.
This adjustment allows a more efficient cleaning action on very difficult and dirty
surfaces.
27
Publicité
