Publicité
ASSEMBLY
ACCESS TO THE BATTERY COMPARTMENT
To reach the battery compartment, first of all make sure that the recovery tank (1) is empty by
opening the cover (2).
If the tank is full, proceed as indicated under "RECOVERY TANK CLEANING", otherwise take
off the squeegee hose (3) and lift the tank.
Thanks to a blocking system of 2 levels, the machine allows the battery charging
with a partial tank opening.
Battery Installation
The machine is equipped either with batteries in serial connection or elements of
DIN-type assembled together and connected in series, placed in its appropriate
compartment under the recovery tank and must be handled using suitable lifting
equipment (due to weight, considering the type of batteries chosen, and coupling
system).
The batteries must be in accordance with CEI 21-5 Norms.
The machine is originally set for the use of standard traditional
lead/acid batteries.
CHECK SETTING ON THE INDICATOR (see under paragraph "BATTERIES CHARGE
LEVEL INDICATOR").
In case of GEL or AGM batteries installation, it is necessary TO MODIFY THE
SETTING (see under "TO CHANGE THE BATTERY SETTINGS").
11
Publicité
