Publicité
TRANSPORT AND STORAGE
Splash Guard Replacement
1. Unscrew the knobs in the rear part of the brushes base group from the
extremity of the metal strips. The operation has to be carried out on both splash
guards.
2. Unscrew the nut on the front part of the brushes base group and take off the
metal strips.
3. Replace the splash guard rubbers and follow the assembling instructions
under "SPLASH GUARD ASSEMBLY" paragraph.
With the brush assembled, the splash guard must slightly touch the floor.
Transport
Do not strike shelvings or scaffoldings where there is danger of falling objects.
Leaving the machine in parking position, remove the key and set the parking brake.
Do not use the machine as a means of transport.
Adjust the working speed to the surface conditions; particularly, slow down before
narrow curves have to be faced.
36
Publicité
