Publicité
CLEANING
Move the machine before picking up the brushes in order to avoid injuries.
Brush Cleaning
Disassemble the brushes and clean them with a water jet (check under paragraph of
"BRUSHES DISASSEMBLY").
Squeegee Cleaning
Keeping the squeegee clean guarantees always the best drying result.
For squeegee cleaning it is necessary to:
1. Take off the squeegee hose (4) from the coupling.
2. Disassemble the squeegee from its support (1) by loosening the knobs (2)
counterclockwise and sliding the threaded parts in the appropriate slots up to
their release.
3. Clean the internal part of the squeegee inlet to eliminate dirt residue.
4. Clean the squeegee rubbers.
5. Reassemble all parts, paying attention to put the washers (3) into position,
there are two for each knob, they are assembled one under and the other on top
of the two slots on the squeegee support.
32
Publicité
