Publicité
ASSEMBLY
With the brushes base group in lifted position, insert the brushes into their plate
seat underneath the brushes base turning them until the three metal buttons are
properly seated in their slots; quickly rotate the brushes to push the button towards
the coupling spring until they get locked. The figure shows the rotating direction for
brushes coupling.
For a longer life of the brushes we suggest to invert daily their position. Whenever
brushes were deformed we suggest to reassemble them in the same position,
avoiding that the different inclination of the bristles causes excessive motor
overload or troublesome vibrations.
Use only brushes supplied with the machine or the ones indicated in the paragraph
"RECOMMENDED BRUSHES". The use of other brushes can compromise security.
STANDBY MODE
After a certain period of inactivity of the machine, it goes in stand-by mode and
the display turns off. To start again press any button on the instrument board, the
display will turn on again and after few seconds the machine returns to normal
operations.
Prior to machine operation, pre-sweep floor to remove debris
before using the unit.
17
Publicité
