Publicité
WEEKLY MAINTENANCE
Rear Squeegee Rubber Check
Check the squeegee rubber wear and eventually turn or replace it.
For the replacement it is necessary to:
1. Lift the squeegee (see under paragraph "STOP OF THE MACHINE AFTER
CLEANING OPERATION").
2. Release the latches (1).
3. Unscrew the wing nuts (2) to take off the hooks of the outer rubber holder
blades (3) and then take off the central rubber holder blade (4).
4. Take off the rubber (5), turn it to a new side or replace it.
To reassemble the squeegee reverse the steps above.
Squeegee Hose Cleaning
Weekly or in case of poor suction, it is necessary to check that the squeegee hose is
not clogged. To clean it, proceed as follows:
1. Take off the hose from the squeegee coupling.
2. Wash the inside of the hose with a water jet.
To reassemble the hose reverse the steps above.
CLEANING
33
Publicité
