Publicité
Les langues disponibles
Les langues disponibles
Operating manual
EN
for the user
Tip!
Refill the pellets while the pellet fireplace is cold!
Warning! Risk of serious personal injury,
property damage and/or environmental damage!
● The pellet fireplace may only be fired with pellets which
comply with DIN EN 14961-2 and the DIN-plus certification
programme or the Austrian standard M 7135: Max. moisture
10%, max. diameter 6 mm, max. length 30 mm!
● Store pellets in a dry and dust-free location!
● Do not allow any materials other than the pellets specified
above to get into the burner trough! Burning other flamma-
ble materials or waste causes damage to the pellet fireplace
and results in invalidation of the warranty!
● Never use flammable liquids such as petrol, lamp oils simi-
lar to petrol, petroleum, firelighters, or similar liquids to kin-
dle or "reignite" a fire! And make sure that such liquids are
a sufficient distance away from the pellet fireplace during
operation!
● Pellets may never be manually placed into the burner
trough, with the following exception: if the reservoir has
run empty, a handful of pellets must be poured into the
burner trough towards the igniter. Otherwise, only the pel-
let duct will be filled within the filling period in the start
phase and only an insufficient pellets will fall into the burn-
er trough.
Fig. 3.5
Never use flammable liquids
We reserve the right to make technical changes
Fig. 3.6
Maintain a sufficient distance
from flammable liquids
Fig. 3.7
Do not manually pour pellets into the burner trough except if the
reservoir has run empty
VESTA 6 kW
51
Publicité
