Olsberg VESTA 6 KW Instructions De Montage page 48

Installation instructions
EN
for the specialist company
2.8 Electrical connection
Plug the enclosed connector into the socket on the rear of the pellet
fireplace. If the pellet fireplace should be operated with accessories
(external room thermostat), connect the connections to the connec-
tor as described in the accessory instructions first.
Note! The connector must be plugged in even without acces-
sories, otherwise the pellet fireplace is not ready for operation.
Underpressure Room temperature
Flame
Fig. 2.22 Electrical connection diagram
48
Bu er 1 Door
Water bag Bu er 2
Ignition
Pump
Infrared
Earthquake Ext. Release
Supply air Hall sensor
Reserve Induced Tangential fan
draught
VESTA 6 kW
Display
We reserve the right to make technical changes