Olsberg VESTA 6 KW Instructions De Montage page 44

Installation instructions
EN
for the specialist company
Fig. 2.8 Plug the Ø 80 mm combustion air line into the rear
Conversion of combustion air nozzles for connection
from the bottom
● Remove the lower back wall and panel!
● Unscrew the combustion air nozzles!
● Screw the combustion air nozzles onto the base plate.
● Install the panel and lower back wall again.
● Use the enclosed cover and screws to close the hold in the bot-
tom of the rear wall for the combustion air connection!
Fig. 2.9 Remove the lower back wall and panel
44
8
Fig. 2.10 Unscrew the combustion air nozzles
3 9x
Fig. 2.11 Screw the combustion air nozzles onto the base plate
VESTA 6 kW
3
We reserve the right to make technical changes
3