Introduction - Mettler Toledo AE Série Mode D'emploi

INTRODUCTION

Further information / technical data
– Consult the particular balance Operating Instructions for information on balance operation.
– Connection and configuration of the data output are explained in the "Installation Instructions for Option 011 Data Output
for AE balances". (These instructions are included in the data output kit).
– For a general understanding of the CL Data Interface (instrument and program technical information), we recommend you
read the Technical Information Bulletin (TIB), "The METTLER TOLEDO CL Data lnterface".
2
General remarks
METTLER TOLEDO AE balances can be equipped with an 011 Data
Output Option (with a CL and an RS232C data interface).
CL These data interfaces allow measuring results to be transferred to
a data receiver. As a result, the balance can be used as a measuring
RS232C
value generator in a data system.
The alphanumeric printer, the METTLER TOLEDO CL System or a
non-METTLER TOLEDO instrument with active 20 mA current loop
interfacing (terminal, desk-top calculator) can be connected over
the CL Data Interface.
The RS232C Data Interface allows a correspondingly equipped
non-METTLER TOLEDO instrument (terminal, (mini-) computer) to
be connected.