Fulgor Milano FCO 6215 TEM Instructions Pour L'installation Et L'utilisation page 69

Removing the slide oven door
1. Decide whether you want the door to open to the left or right before
positioning the appliance in the oven recess.
2. Fully open the door.
3. Remove the four fixing screws from the door hinge.
4. Remove the four plastic caps from the opposite side and unscrew
the locking pin.
5. Turn the door 180°.
6. Secure the door in its new position using the 4 screws removed
previously.
NOTE: Make sure that the oven door is perfectly parallel with the
front panel. If it is not, adjust it by means of the screws you
have just inserted.
7. Fix the oven in the oven recess using the 4 screws and the plastic
spacers provided.
How to remove the inner glass of the "FULL
GLASS" panoramic door
1. Wear protective gloves.
2. Place the door on a flat horizontal surface face down on a soft cloth
to avoid scratching the visible part.
3. Remove the two lateral caps and pull out the top strip.
EN
31