Fulgor Milano FCO 6215 TEM Instructions Pour L'installation Et L'utilisation page 49

Before using your oven for the first time remove all packing and foreign materials from the oven(s). Any material of this sort left inside may melt or
burn when the appliance is used.
Error codes
This code appears in the event of the electronic control indicating a
fault. When the error appears, the current function is blocked. If the type
of error is related to a safety function, the oven becomes unusable and
every time a start attempt is made, the same error appears (in which
case call in the after-sales service), while if the error relates to a minor
fault, after being restarted the oven can be used for the functions that do
not involve the faulty part (e.g., a heating element).
Beeps
Confirms that the command has been received after a key has been
pressed.
It also indicates that a time function has been completed (e.g. Timer or
Timed Cooking). During the execution of a recipe, an acoustic signal
warns the user that the oven is waiting for operation by the user (e.g.,
insert the dish or turn it over).
Beeps also signal an oven fault.
Default Settings
The cooking modes automatically select a suitable temperature when
the cooking mode is selected, these can be changed when a different
one is needed.
F Failure Number Codes
These codes are displayed when the electronic control detects a
problem in the oven or in the electronics.
The error code is recorded in the Error Log in the Setup menu. This
error can be communicated to the service technician so he/she can
understand the possible cause of the problem in advance.
Locking the keyboard
Hold the key for 3 seconds. Commands are now locked and a
"Key icon" will be displayed.
Repeat the same operation for 3 seconds to unlock the keyboard.
NOTE: The power off operation is always available.
6 - General Oven Information
Preheat and Fast Preheat
Whenever a cooking mode is set and the oven is heating, the preheating
starts, during this period, the instantaneous temperature is displayed
together with the thermometer icon.
As soon as the 100% is reached, the control sounds an "end of preheat"
tone and the current temperature value disappears.
When it's necessary to heat up the oven rapidly, a Fast Preheat mode
is available: it uses the heating elements and the convection fan in a
special way, in order to reduce the heating time as long as possible.
After having set one of the cooking functions for which the fast preheat
is available and set the desired temperature value touch the
after entering the functions menu, select the icon
keys and confirm by means of the key
As soon as the set-point temperature is reached, the control sounds a
and both "Fast Preheat Icon" and "current temperature" disappear.
The oven switches automatically to the desired cooking mode that was
previously set: put the food inside now.
Timer
WARNING
The timer on your oven does not turn the appliance on or off, its only
purpose is to alert you through the buzzer. When you want to turn off
the oven automatically, use the end-of-cooking or delayed cooking
function.
NOTE Pressing the OFF button does not reset or stop the timer.
1. Press the button and set the desired time using the arrows
and confirm with the button
hours and minutes use the arrows
2. The time can be set from 1 minute to 12 hours and 59 minutes and,
when set, the remaining time is always visible in the bottom status
bar until the time expires or is reset.
3. To change or cancel the time set, you must reset the timer by
pressing and holding the button
4. Timer format is usually HR:MIN, switching into MIN:SEC during the
last minute.
5. When the time expires, the display shows 00:00 and the buzzer
will sound for one minute or until the button
key,
by means of the
.
. To switch the selection between
.
for a few seconds.
is pressed.
EN
11