enovis ARTROMOT K1 Mode D'emploi page 55

− Timer (therapy time)
− Reverse on load
(feature for patient safety)
LEVEL 3:
– Stretching in extension
– Stretching in flexion
– Workout protocol
– Comfort protocol
LEVEL 4:
− EROM repeat extension
− EROM repeat flexion
– EMS control
– Total therapy time
LEVEL 5:
– Transport setting
– New patient
– Therapy documentation
– Service menu
5.5 Protocol details – Comfort
model
− You access the different programming
levels by repeated depressions of the
MENU button.
− You select the treatment parameters
with the corresponding parameter
button.
− You change the treatment values with
the +/− buttons and you enable/disable
functions by pressing the corresponding
parameter button again.
− You save the settings by pressing the
STOP button.
With the default settings all special func-
tions are disabled.
MENU
Note!
LEVEL 1: equivalent to level 1 of the
Standard model (see: 5.3)
LEVEL 2: equivalent to level 2 of the
Standard model (see: 5.3)
n Stretching in extension
With the special "stretching in exten-
sion" function the joint will be gently
stretched beyond the extension limit.
MENU
Starting at the middle position the
carriage will first move to the pro-
grammed flexion limit and then to the
programmed extension limit.
Subsequently the carriage reverses
5° toward the flexion angle and then
moves very slowly back again to the
programmed extension limit (display
<=). After that it attempts to stretch the
joint another 5°, moving even slower
than before (display <<).
If a high resistance toward the addi-
MENU
tional 5° is sensed, the reverse-on-load
function is automatically activated
and the device moves in the opposite
direction.
This stretch cycle is repeated 10 times.
After that the carriage moves to the
programmed flexion limit and restarts
the stretching in extension cycle.
It is not possible to activate the special
"stretching in extension" and "stretching
in flexion" functions at the same time.
Note!
If an extension pause is programmed
when you enable the function, the car-
riage will stop for the duration of the
pause each time the maximum stretch-
ing value is attained.
n Stretching in flexion
With the special "stretching in flex-
ion" function the joint will be gently
stretched beyond the flexion limit.
Starting at the middle position the car-
53