ULTIMATE SPEED ULGD 5.0 C1 Traduction Du Mode D'emploi D'origine page 17

3
4
Program 1
To charge 6 V batteries with a capacity less than 14 Ah.
Press the program selector button
The symbol
process, the charging display
process has progressed (1 – 4 bars). When the battery is fully charged,
the status display
switches to trickle charging automatically.
Program 2
To charge 12 V batteries with a capacity less than 14 Ah.
Press the program selector button
is shown in the LC display. During the charging process, the charging
4
display flashes and shows how far the charging process has progres-
8
sed (1 – 4 bars). When the battery is fully charged, the status display
shows 4 bars. The flashing stops and the device switches to trickle
charging automatically.
Program 3
To charge 12 V batteries with a capacity of
14 Ah – 120 Ah. Press the program selector button
3. The symbol
process, the charging display
process has progressed (1 – 4 bars). When the battery is fully charged,
the status display
switches to trickle charging automatically.
Program 4
To charge 12 V batteries with a capacity of 14 Ah – 120 Ah under cold
conditions or to charge AGM batteries.Press the program selector button
to select Program 4.
11
NOTE:
This program starts, with a slight time delay if necessary.
The symbol
process, the charging display
process has progressed (1 – 4 bars). When the battery is fully charged,
the status display
switches to trickle charging automatically.
Trickle charging
As described in „Selecting programs", the device has an automatic trickle
charging procedure. Depending on the drop in voltage in the batte-
ry – through self-discharge – the charger reacts with different levels of
14.4 V
14.7 V
, „6 V", (7.3 V / 0.8 A)
is shown in the LC display. During the charging
7
shows 4 bars. The flashing stops and the device
9
, „12 V", (14.4 V / 0.8 A)
, „12 V", (14.4 V / 5.0 A)
is shown in the LC display. During the charging
5
shows 4 bars. The flashing stops and the device
9
, „12 V", (14.7 V / 5.0 A)
is shown in the LC display. During the charging
6
shows 4 bars. The flashing stops and the device
9
5.0 A
5.0 A
to select Program 1.
11
flashes and shows how far the charging
8
to select Program 2. The symbol
11
flashes and shows how far the charging
8
flashes and shows how far the charging
8
GB/IE/NI/CY/MT
to select Program
11
17
9