Publicité
Les langues disponibles
Les langues disponibles
If you are leaving the device unsupervised;
–
If you are doing cleaning work;
–
If the connection cable is damaged;
–
Only use the accessories supplied and
„
recommended by the manufacturer.
Do not disassemble or modify the car and mo-
„
torcycle battery charger. This device must only
be repaired by a maintenance technician.
Do not use the device in areas with a risk of
„
explosion, e.g. near flammable liquids, gases
or powders.
Do not expose the device to any source of
„
heat.
CAUTION: How to avoid accidents
„
and injuries from electric shock:
Electrical safety:
Do not carry the device by the cable. Do not
„
unplug the plug from the socket by pulling on
the cable. Protect the cable from heat, oil and
sharp edges.
If the cable is damaged, unplug the plug im-
„
mediately from the socket.
z Specific safety instructions
A slightly higher temperature during charging
„
is absolutely normal and not a malfunction.
Protect the car and motorcycle battery charger
„
from moisture and high temperatures, inclu-
1
ding fires.
Store the car and motorcycle battery charger
„
in a dry place and protect the device from
1
moisture and corrosion.
Do not drop the car and motorcycle battery
„
charger
z Before use
Take all parts from the packaging and check whether the device or
„
parts show any damage. If this is the case, do not use the device.
Contact the manufacturer via the indicated service address. Remove
all protective films and other transport packaging. Check that the de-
livery is complete.
Always pull the mains plug from the socket before you perform any
„
14
GB/IE/NI/CY/MT
while it is being used.
1
Publicité
