TermaTech TT44 Serie Notice De Montage Et D'utilisation page 47

9
Environment, Climate & Disposal
When disposing of your wood stove or the packaging from your wood stove, it's important to dispose of the parts separately.
Below is how this should be done correctly and in the most environmentally friendly manner. All parts of the packaging and mo st
parts of the wood stove itself can be recycled.
Cardboard:
The cardboard used for packaging is 100% recyclable paper and should be sorted and recycled through your local waste/recycling
station or waste management partner according to their guidelines.
Plastic and Styrofoam:
The plastic and Styrofoam used for packaging should be sorted according to your local waste/recycling station or waste
management partner's guidelines for proper disposal.
Wooden Pallet/Framing:
The wood and pallet used for packaging (meeting requirements/certification) should be sorted and recycled through your local
waste/recycling station or waste management partner's guidelines.
Vermiculite/Insulation Panels/Gaskets:
Cannot be recycled and should be sorted through your local waste/recycling station or waste management partner's guidelines.
Glass:
If you replace or dispose of the glass from your wood stove, it should not be discarded with regular glass waste as it is ceramic
glass (dispose of it as ceramics).
Stone Cladding:
Cannot be immediately recycled and should be sorted through your local waste/recycling station or waste management partner's
guidelines (dispose of it as natural stone).
The Stove:
All other parts of your stove are made of either steel or cast iron and should be sorted and recycled through your local
waste/recycling station or waste management according to their guidelines.
10
Approval & Technical Specifications
TEKNOLOGISK INSTITUT, Energi og Klima
Vedvarende Energi og Transport
Kongsvang Allé 29
8000 Aarhus C
www.teknologisk.dk
The wood stove series has been tested and approved according to the standards:
CE - EN13240 (EU)
DIN+ (Tyskland)
Defra / AEA (UK)
Ecodesign 2015/1185
Dimensions of the combustion chamber are:
Height 146mm (to Max load)
Depth 231mm
Width 324mm
The flue outlet diameter is: 150mm
Stove Weight: TT44G 113 kg
Stove Weight: TT44 113 kg
Stove Weight: TT44S 147 kg
Mean values during testing:
Flue gas temperature: 331°C (Measured at the flue outlet at 20°C room temperature)
Flue gas mass flow: 4,2 g/s
Efficiency 81%
Annual Efficiency: 71%
Power: 4,8KW
CO: 0,098% or 1225 mg/nm3 v/13% O2
Chimney draft 12Pa
47
TermaTech A/S, Gunnar Clausens Vej 36, DK-8260 Viby J www.termatech.com 03-07-2024 LP Item no. 99-291 / 101-212