TermaTech TT44 Serie Notice De Montage Et D'utilisation page 41

7
Safety Distances and Placement of the Stove
Be particularly attentive to the different clearance requirements and distances to combustible materials for flue pipes, chimney
components, and the wood-burning stove. Distances below only apply to the stove.
Clearances to Non-Combustible Materials:
To prevent discoloration, odor from paint and wallpaper that is heat-affected, as well as to enhance heat output from the stove
and facilitate cleaning, it is recommended to maintain a minimum distance of at least 100mm.
Clearances to Combustible Materials:
The following minimum clearances are applicable for the stove to combustible materials and must be adhered to. Even with these
minimum clearances, the walls may still become warm (up to 80°C).
7.1 TT44G: Safety distances when using UNINSULATED flue Pipes
Distance to Combustible Wall Behind the Stove:
Distance to Combustible Side Wall:
Distance at 45° Placement in Corner:
Furniture Clearance:
The distance from the top of the stove to the ceiling, minimum:
Figure 1
TermaTech A/S, Gunnar Clausens Vej 36, DK-8260 Viby J www.termatech.com 03-07-2024 LP
180mm Figure 1:
400mm Figure 1:
250mm Figure 2:
1000mm Figure 1 & 2:
750mm
Figure 2
Item no. 99-291 / 101-212
41