TermaTech TT44 Serie Notice De Montage Et D'utilisation page 46

8.6 If the stove have to be installed with a rear exit, or has to be connected to external air
supply, do following.
8.7 Smoke control area – Damper Control unit installation
Install a pinion screw here. See the white arrow. This means that air can´t be closed off completely.
TermaTech A/S, Gunnar Clausens Vej 36, DK-8260 Viby J
Bill.8.6.1
1. If the stove have to be use with rear exit. Remove the 4
break points. See the yellow rings at Photo 8.6.1.
2. If the stove have to be use with external air-intake. Remove
the 4 break points. See the yellow rings at Photo 8.6.2.
Tools: Use a loose saw blade or something similar.
Method:
Start by sawing through the breaking points point 1 and 3. After
Bill. 8.6.2
that the plate can be broken free by pushing the plate back and
forth.
www.termatech.com 03-07-2024 LP Item no. 99-291 / 101-212
46