Publicité
Les langues disponibles
Les langues disponibles
TCD 2044
6.0 - MAINTENANCE
The control needs no special maintenance. To ensure optimum performance of the equipment, check the cables and the
electrical connections once a year.
Clean the control with a soft cloth dampened with water. Do not use chemical or abrasive products to clean the control.
7.0 - TECHNICAL DATA
OUTPUT CHARACTERISTICS
Current capacity of right or left thruster controls
INPUT CHARACTERISTICS
Supply voltage (1)
Quiescent current (2)
Maximum current absorption (3)
AMBIENT CHARACTERISTICS
Operating temperature
Protection rating (4)
GENERAL CHARACTERISTICS
Weight
EMC class
(1) With power supply voltage less than 9 Vdc the control can reset.
(2) Typical value with control disabled.
(3) Typical value with control enabled and one direction button pressed.
(4) Excluding the back of the control (IP20).
Dimensions in mm (inches)
26
74 (2
29
/
)
31
INSTALLATION AND USE MANUAL - REV 002A
4A max
from 9 to 31 Vdc
10 mA
95 mA + absorption of contactor coil
from -20°C to +70 °C
IP66
250 g
EN 60945 - FCC TITLE 47 Part 15 SUBPART B CLASS B
115 x 61 (4
17
/
2
13
32 x
/
)
32
EN
Publicité
