Publicité
Les langues disponibles
Les langues disponibles
TCD 2044
3.0 - OPERATION
3.3 - Enabling the control
To enable the control, press the enabling button and keep it pressed for at least 1 second.
After this interval the enabling LEDs will start flashing with greater frequency and the control will emit a short sound.
Release the enabling button, the enabling LEDs will remain steadily lit on and the control will be enabled.
In this condition the control will emit a short sound every 5 seconds.
3.4 - Single thruster operation
BOW
STERN
When the thruster is activated the direction LED corresponding to the commanded movement (red to the left, green to
the right) will light on and the control will emit an intermittent sound.
ATTENTION: once the direction joystick has been released, the boat will continue to move due to inertia.
INSTALLATION AND USE MANUAL - REV 002A
TCD 2044
BOW LEVER
TO THE RIGHT
BOW LEVER
TO THE LEFT
TCD 2044
STERN LEVER
TO THE LEFT
STERN LEVER
TO THE RIGHT
EN
21
Publicité
