Publicité
Les langues disponibles
Les langues disponibles
TCD 2044
1.0 - INFORMATION ABOUT THE PRODUCT
The control is designed to control the stern and bow thrusters manufactured by Quick
1.1 - Main characteristics
• Simple and intuitive user interface.
• Universal power supply (12/24 Vdc).
• Can work in a wide range of temperatures.
• Possibility of connecting several TCD controls in parallel.
• Easy to install by means of connectors (not supplied, to be purchased separately).
• Automatic priority system.
• Automatic disabling.
• Protection against reverse polarity, output short circuit, prolonged activity of motor and interruption of thruster controls
wiring.
• Acoustic signals (that can be deactivated).
1.2 - Important Notes
The installation of the control must be carried out by qualified personnel.
BEFORE USING THE CONTROL PANEL, READ THIS INSTRUCTION MANUAL CAREFULLY.
IN CASE OF DOUBTS, CONTACT QUICK
F
In case of discordance or errors in translation between the translated version and the original text in the Italian
language, reference will be made to the Italian text.
F
This device was designed and constructed for use on recreational crafts.
Other uses are not permitted without written authorization from the company Quick
Quick
reserves the right to modify the technical characteristics of the equipment and the contents of this manual
®
without prior notice.
The TCD control has been designed and constructed for the purposes described in this instruction manual. Quick
not be held responsible for any direct or indirect property damage or personal injury caused by inappropriate or unintend-
ed use of the equipment, incorrect installation or any errors that may be present in this manual.
THE WARRANTY SHALL BE VOID IF THE CONTROL IS TAMPERED WITH OR ALTERED BY NON AUTHORISED
PERSONNEL.
1.3 - Precautions for safety and use
• Install the control after completing all the carpentry work in the area where the control will be installed.
• Any foreign bodies might interfere with the correct operation of the lever (e.g. fibreglass powder). If this requirement
is not followed, any malfunction will be the installer's responsibility and therefore will not be covered by the warranty.
1.4 - Package Content
TCD 2044 control
16
CUSTOMER SERVICE OR YOUR LOCAL DEALER.
®
4 self-tapping
fixing screws
INSTALLATION AND USE MANUAL - REV 002A
Drilling template
.
®
.
®
Installation and use manual
Warranty conditions
EN
shall
®
Publicité
