72
N°
ERROR MESSAGE
117 Delivery time-out
(selections with hot
instant beverages)
118 Error on air break
micro
119 Cup delivery micro
120 Wrong coffee dose.
E
N
G
L
I
126 Coffee doser 2 unit
S
H
127 Grinding 2 time-out
130 Payment system out of
service.
131 Time-out beverage
execution
FAS International S.r.l. - 60 Via Lago di Vico - 36015 SCHIO (VI) Italy - tel. +39 0445 502011 – fax +39 0445 502010 - e-mail:
SUB-
CAUSE OF THE ERROR
CODE
1
The impulse time counted
by the volumetric meter
2
exceeds the time-out.
3
4
During dispensing, no water
is requested
The cup release motor
hasn't completed the
rotation
The espresso coffee flow is
too slow
The coffee doser
microswitch 2 does not
change status after having
dispensed the ground
coffee dose
The maximum programmed
time for grinding 2 has
elapsed
Dispensing time exceeded
FAS VICTORIA - ISSUE 00
SOLUTION
Check the fan.
Check the water pump.
The solenoid valve indicated by the sub-
code does not open
Check the air-break microswitch is working
properly, and that the float is not jammed
Check the cup delivery microswitch (CMB)
is working properly
Check the correct operation of the cup
release gear motor (MS)
Check the dose and the grain size of the
ground coffee
Clean the coffee unit filters, as they are
clogged.
Check the pump is working properly
Coffee doser 2 is clogged
Check the doser microswitch (MCDC 2) is
working properly
Check the electromagnet (EMDC 2) is
working properly.
The coffee 2 has run out
Check the coffee grinder motor (MMC 2) is
working properly
Check the coffee doser control microswitch
(MCDC 2) is working properly.
Payment
system
disconnected,
powered, or faulty
Check if the hydraulic circuit is clogged
Incorrect recipe parameter settings
not
info@fas.it