FAS VICTORIA Manuel D'utilisation page 41

FAS VICTORIA - ISSUE 00
Purchase obligation before change is given: when this box is ticked, the customer is obliged to complete
the purchase before receiving change. This is to prevent the coin mechanism being used as a coin-changer.
If the purchase fails to happen, the change will be given out.
Minimum level of tubes: this is the number of coins (for each coin mechanism) that must remain in each tube
in order for the delivery system to work properly (to set the correct value of this parameter, refer to the coin
mechanism manual). If a different value is associated to each tube, the maximum value set must be between
those indicated. The setting of this parameter is fundamental for ensuring the correct coin management by the
vending machine.
N.B. The inventory of the tubes, icon
reaches the value set in Minimum tube level. To empty the tubes completely, use the coin box mechanism
delivery buttons.
Enable acceptance of banknotes in exact amount condition: ticking this box under exact amount
conditions inhibits the banknote reader
Update content of change-giver tubes from coin mechanism: select whether to use the counters
corresponding to the content of the coin mechanism change-giving tube or use only the counters inside the
machine. When the box is ticked, at each power-up the counters inside the machine which correspond to the
content of the change-giving tubes are updated with the values transmitted by the coin mechanism.
Inhibit cashless credit display: prevent or enable display of credit from the MDB cashless device (key or
card reader). When the box is ticked, the credit for the cashless device is not displayed
Level of coins for exact amount: this command is for setting (for each change-giving tube) the
number of coins below which the machine can be considered to be in a condition of 'no coins available for
change'. The set value must always be higher than the minimum coin level in the tubes (example: if the
Minimum level of tubes is set at 5, the values set in this command must have a minimum value of 6). The
tubes that are not included in this condition must be set at "0".
When the contents of any one of the tubes included in the condition drops below the corresponding set value,
the machine displays the warning that there are no coins available for change.
Enable coins: enable/disable acceptance of particular coins by the coin mechanism.
Enable notes: enable/disable acceptance of particular banknotes by the reader
Enable exact sum coins: this command is used to enable/disable the acceptance of special coins in
terms of rest small when the display shows the message "insert only exact amount".
Enable escrow: enable the "Escrow" function for each banknote
Coin table: a table can be created by associating the value of coins and coin identification numbers
when there is a selector instead of a coin mechanism. (i.e. associate a 1 Euro coin with Coin 3 and a 50 cents
coin with Coin 4)
FAS International S.r.l. - 60 Via Lago di Vico - 36015 SCHIO (VI) Italy - tel. +39 0445 502011 – fax +39 0445 502010 - e-mail:
located in Tube filling, stops when the content of each tube
39
E
N
G
L
I
S
H
info@fas.it