Publicité
Les langues disponibles
Les langues disponibles
50
9.1.9
By clicking icon
configuration: e.g. number of mixers, single or double hopper, etc.) (see MACHINE MODEL / INTERNAL
LAYOUT CONFIGURATION TABLES)
Click on the
changed, it is not necessary to alter the impulse value in the recipes or machine cloning as the parameters will
E
be automatically recalculated on the basis of the flow sensor selected.
N
G
L
I
S
H
9.1.10
The machine programming parameters (i.e. the "configuration") can be imported and exported through this
icon by using a USB pen drive.
Insert the pen drive in the USB port marked with label "USB- All applications"
N.B. The same operation can also be carried out using the
Control panel sub-menu, which however presupposes that the file is in the local memory of the tablet
or in FAS Cloud.
FAS International S.r.l. - 60 Via Lago di Vico - 36015 SCHIO (VI) Italy - tel. +39 0445 502011 – fax +39 0445 502010 - e-mail:
MACHINE LAYOUT
the wanted layout can be selected (the term layout implies the machine's physical
icon to select the flow sensor used
CLONING
(Ø
1.8mm or
Ø
1.2mm). When this parameter is
Update configuration icon from the
FAS VICTORIA - ISSUE 00
info@fas.it
Publicité
