Télécharger Imprimer la page

ULTIMATE SPEED ULGD 5.0 D2 Traduction Du Mode D'emploi D'origine page 11

Masquer les pouces Voir aussi pour ULGD 5.0 D2:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 41
in a weather-protected space that is ventilated
well. Ensure that there are no naked flames
(flames, embers or sparks) during charging or
trickle charging!
EXPLOSION AND FIRE HAZARDS!
Ensure that explosive or flammable sub-
stances, such as petrol or solvents cannot
be ignited when you are using the car &
motorcycle battery charger!
EXPLOSIVE GASES!
Avoid flames and sparks!
Ensure sufficient ventilation when charging.
Put the battery onto a well-ventilated surface
when charging. Otherwise, the device can be
damaged.
EXPLOSION HAZARD!
Ensure that the positive pole connection cable
has no contact with a fuel line (e.g. petrol
line)!
DANGER OF CAUSTIC BURNS!
Protect your eyes and skin from caustic burns
from the acid (sulphuric acid) when it comes
into contact with the battery!
Use acid-resistant safety goggles, clothing and
gloves! If your eyes or skin have come into con-
tact with the sulphuric acid, flush the affected
body region with plenty of clear, running water
and seek medical advice at once!
Avoid electrical short circuits when connecting
the car & motorcycle battery charger to the
battery. Connect the negative pole connection
cable only to the negative pole of the battery
or the car body. Connect the positive pole
connection cable only to the positive pole of
the battery!
Before connecting to the mains, verify the
mains power has the required 230 V~ 50 Hz,
a 16 A fuse and an ELCB switch (earth
leakage circuit breaker)! Otherwise, the
device can be damaged.
Do not use the car & motorcycle battery
charger near any fires, heat and long-term
GB/IE/NI/CY/MT
11

Publicité

loading