Publicité
Les langues disponibles
Les langues disponibles
Please note that locally applicable laws and regulations determine the minimum age of the
operator and may restrict the use of this machine!
Work on electrical components or equipment may only be carried out by a qualified
electrician or under the guidance and supervision of a qualified electrician.
Put on your personal protective equipment before working on the machine.
12.3
Safety devices
The machine is equipped with following safety devices:
Blade guard (covering blade shaft)
V-Belt / chain-drive guard
Separating protective device behind planer
stop(fixed)
Thicknesser
Anti-kick-back device
12.4
General safety instructions
To avoid malfunctions, damage and health hazards when working with the machine, in addition to
the general rules for safe working, the following points in particular must be observed:
Before connecting the machine to the main power supply, make sure all the safety items
•
are in the working position and check their working conditions, if necessary, to remove the
door or protective cover, cut off the main switch and lock it and cut off the power supply.
Choose a level, vibration-free, non-slip surface for the installation location.
•
Ensure sufficient space around the machine!
•
Ensure sufficient lighting conditions at the workplace to avoid stroboscopic effects!
•
•
Ensure a clean working environment!
•
Only use perfect tools that are free of cracks and other defects (e.g. deformations).
•
Remove adjustment tools from the machine before switching it on.
•
Keep the area around the machine free of obstacles (e.g. dust, chips, cut workpiece parts
etc.).
•
Check the strength of the machine connections before each use.
•
Never leave the running machine unattended. The machine must be stopped if it is
unattended.
•
The machine may only be operated, maintained or repaired by persons who are familiar
with it and who have been informed of the dangers arising in the course of this work.
•
Ensure that unauthorised persons maintain a safe distance from the machine and keep
children away from the machine.
Wear suitable protective equipment (eye protection, dust mask, respiratory protection, ear
•
protection, gloves when handling tools) as well as close-fitting work protective clothing -
never loose clothing, ties, jewellery, etc. - danger of being drawn in!
Hide long hair under hair protection.
•
Do not remove any sections or other parts of the workpiece from the cutting area while the
•
machine is running!
Always work with care and the necessary caution and never use excessive force.
•
Do not overload the machine!
•
Do not work on the machine if it is tired, not concentrated or under the influence of
•
medication, alcohol or drugs!
Do not use the machine in areas where vapours from paints, solvents or flammable liquids
•
represent a potential danger (danger of fire or explosion!).
Do not smoke in the immediate vicinity of the machine (fire hazard)!
•
Make sure that the main switch is in the "O" position before connecting the machine to the
•
power source.
Ensure that the machine is earthed.
•
Only use suitable extension cords.
•
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
•
Separating protective device (fixed)
Separating protective device (fixed)
•
Separating protective device (fixed)
•
To be remove before changing to thicknesser
mode
Moveable guard with safety switch for
•
monitoring
The anti-kickback device prevent the
•
workpiece from kicking back
HOB410ECO_400V | HOB410ECOSMW2_400V
SAFETY
30
Publicité
