Migatronic CenTIG 200 AC/DC Guide De L'utilisateur page 13

Technical data
Power Source
Mains voltage *) ±10% (50-60Hz), V
Faser
Minimum generator size, kVA
Minimum short-circuit power Ssc, MVA
1)
Fuse (C), A
Mains current effective, A
Mains current max., A
Power 100%, kVA
Power max., kVA
Power open circuit, W
Efficiency, %
Power factor
Current range, A
Duty cycle 100% 40°C, A/V
Duty cycle 60% 40°C, A/V
Duty cycle max. 40°C, A/%/V
Open circuit voltage, V
)Sphere of application
2
Protection class
3)
Standards
Dimensions power source (HxWxL), mm
Dimensions incl. trolley (HxwxL), mm
Weight power source, kg
Weight incl. trolley, kg
Cooling Unit
Cooling efficiency (1l/min), W
Tank capacity, litre
Flow, bar - °C - l/min
Pressure max, bar
Standards
Protection class
3)
Dimensions (HxWxL), mm
Weight incl. cooling liquid, kg
*) The machine enables down to -40% by reducing the max. amperage (-40% = TIG: 135A/MMA: 90A).
1) This equipment complies with EN / IEC61000-3-12:2014 (/ 2011), provided that the short-circuit power Ssc of the grid at the interface point is greater than or equal to the stated
data in the abovementioned table. It is the responsibility of the installer or user of the equipment to ensure, by consultation with the distribution network operator if necessary, that
the equipment is connected only to a supply with a short-circuit power Ssc greater than or equal to the stated data in the above-mentioned table.
2) S This machine meets the demand made for machines which are to operate in areas with increased hazard of electric chocks.
3) The machine is designed for indoor and outdoor use according to protection class IP23 / IP23S.
IP23S: The machine may be stored but is not intended to be used outside during precipitation unless sheltered.
CenTIG 200 AC/DC CenTIG 200 DC
230 230
1 1
6.5 6.5
0.14 0.14
16/20 16/20
18.9 18.6
18.9 18.6
4.3 4.3
4.3 4.3
26 26
85 86
0.99 0.99
TIG MMA TIG
5-200 10-140 5-200
/ /
/ / /
200/100/18.0 140/100/25.6 200/100/18.0
53 53
S/CE S/CE
IP23S IP23S
EN/IEC60974-1. EN/IEC60974-3. EN/IEC60974-10 CLASS A
356x210x602 356x210x602
1087x670x602 1087x670x602
13.6 13.0
38.6 38.0
CenCool 1300 230V
1300
2.5
1.2 - 60 - 1.9
3.0
IEC60974-2. IEC60974-10 CL.A
IP23S
342x210x562
15.0
hereby declare that our machine as stated below
Type: CenTIG 200
conforms to directives: 2014/35/EU
European standards:
Regulation:
MMA
Issued in Fjerritslev 26.04.2024
10-140
/
/
140/100/25.6
13
EC DECLARATION OF CONFORMITY
MIGATRONIC A/S
Aggersundvej 33
9690 Fjerritslev
Denmark
2014/30/EU
2011/65/EU
EN IEC60974-1:2018/A1:2019
EN IEC60974-2:2019
EN IEC60974-3:2019
EN IEC60974-10:2014/A1:2015
2019/1784/EU
Kristian M. Madsen
CEO