Migatronic CenTIG 200 AC/DC Guide De L'utilisateur page 11

Connection and start-up
Lift instructions
The lifting point must be used (please
see figure) when lifting the machine. The
machine must not be lifted with mounted
gas bottle!
Software update
• Turn off the machine
• Insert the USB-plug
• Turn on the machine
• Wait until the unit indicates that the
update is complete
• Turn off the machine and remove the
USB-plug
• The machine is now ready for use
The software can be downloaded from
http://migatronic.com to a USB-plug formatted to FAT32.
IMPORTANT:
Save the software in the //MIGA_SW/COMMONPLATFORM file
structure.
Calibration of gas flow: manual gas/IGC
Menu 2
1
3
L
10
=
min
5
L
20 20
=
min
11
2
4
L
10
min
6
L
min