Télécharger Imprimer la page

Dreame DreameBot X30 Ultra Manuel D'utilisation page 11

Masquer les pouces Voir aussi pour DreameBot X30 Ultra:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 31
Routine Maintenance
EN
Parts
To keep the robot in good condition, it is recommended to refer to the accessory usage in the app or the following table for routine maintenance.
Part
Maintenance Frequency
Replacement Period
Used water tank
After each use
/
Clean water tank
Main brush
Every 6 to 12 months
Once every 2 weeks
Dust box's filter
Every 3 to 6 months
Side brush
Mop pad holder
/
Washboard
Base station's
signaling area
Base station's
charging contacts
Base station's
auto-empty vent
Once every month
/
Omnidirectional
wheel
Edge sensor
Laser Distance
Sensor (LDS)
Line laser sensor
AI visual sensor
16
Part
Maintenance Frequency
Replacement Period
Carpet sensor
Cliff sensors
LED auxiliary lights
Robot's charging
contacts
Once every month
Bumper
/
Robot's auto-empty
vent
Robot's automatic
water refilling inlet
Bottom of the robot
Dust box
Clean it as needed
Dust bag
6-8 weeks
/
Mop pad
Every 1 to 3 months
Note: The replacement frequency will depend on your usage of the robot.
If an exception occurs due to special circumstances, the parts should be
replaced.
Routine Maintenance
Washboard Base
The base station will perform washboard self-cleaning along with each mop
pad cleaning. For deep cleaning, please refer to the following steps.
1. Enable the washboard base cleaning function in the app, and the robot
will exit the base station automatically. Take out the washboard and wait for
water to fill the washboard base.
2. Rinse the washboard with clean water, and use the cleaning tool to clean
the washboard base.
3. After a moment, the base station will automatically pump out the used
water. Then wipe the washboard base with a soft and dry cloth, and put the
washboard back into place.
Note: When the cleaning task is done, put the washboard back into the base
station downwards in an inclined way.
4. Use the app or briefly press the button
on the robot to make it return to
the base station.
Note: During cleaning, do not make the robot return to the base station.
EN
17

Publicité

loading

Ce manuel est également adapté pour:

Rlx56ce