Table des Matières
Publicité
DEAR CUSTOMER,
This brochure is intended to familiarise you with the operation of
your battery charger. It is in your own interest to read the
brochure carefully and follow the instructions given exactly - so
as to prevent malfunctions and operating errors. This will help to
ensure that your battery charger continues to give you constant
service for years to come. It is imperative that you read the
section "Safety Regulations" prior to using your battery charger.
OPERATING ELEMENTS
Mains cable/plug
"Charge" indicator
"Final charge/Additional charge" indicator
"Compensation charge" indicator
"Fault" indicator
Stop Button for interrupting or starting charging
Charging line "Positive"
Charging line "Negative"
Cable winder
To store mains and charge cable
Fixture for attaching the optional wall holder
Fig. 1
Battery Charger Selectiva Eco
Text and illustrations correct at time of going to print. Right of alteration reserved.
- red
- black
Optional wall holder (42,0200,8891) with top-hat rail TS 35
(EN 50022)
Optional vehicle immobiliser ("1-pole with changeover con-
tact: 4,100,368" or "2-pole with changeover contact:
4,100,369")
Only with optional vehicle immobiliser:
Sticker with circuit diagram
Only with optional vehicle immobiliser: Control cables
Optional floor-mounting kit (4,100,314)
MOUNTING CHARGING PLUG
Caution! Adapt the charging lines to suit the respective
application (e.g. charging plug etc.). Observe any and all
national regulations and ensure that there is always a
proper electrical connection between the charging lines
and the charging plug.
- Connect charging line
charging plug
- Connect charging line
charging plug
8
ENGLISH
to the positive terminal on the
to the negative terminal on the
Publicité
Table des Matières
