Publicité
Les langues disponibles
Les langues disponibles
Connect with the App
EN
This product works with the Dreamehome or Mi Home/Xiaomi Home app, which can be used to control your device.
1. Download the Dreamehome or Mi Home/Xiaomi
Home App
Scan the QR code on the robot to download Dreamehome app,
or search "Dreamehome", "Mi Home" or "Xiaomi Home" in the
app store to download and install the app based on your needs.
Under the Cover
2. Add Device
Open the Dreamehome app, tap "
then scan the QR code above again to add "DreameBot L10s Pro".
Please follow the prompts to finish the Wi-Fi connection.
Note:
· Only 2.4GHz Wi-Fi is supported.
· The version of the app might have been updated, please follow the instructions
based on the current app version.
10
" in the upper right, and
3. Reset Wi-Fi
Simultaneously press and hold the buttons
you hear a voice to indicate that the robot is waiting for the
network configuration. Once the Wi-Fi indicator is blinking
slowly, the Wi-Fi has been successfully reset.
Note: If your robot cannot connect to the app successfully, reset the Wi-Fi and add
the device again.
and
until
Wi-Fi Indicator
·Blinking slowly: To be connected
·Blinking quickly: Connecting
·On: Wi-Fi connected
Publicité
