Remote Keypad Lcd Screen Description; Introduction; Lcd Control Buttons; Status Mode - Analog way Centrix CTX8022 Manuel Utilisateur

CENTRIX™ & EVENTIX™
Chapter 6 : EVENTIX

6-1. INTRODUCTION

The LCD screen is composed of 2 modes: the STATUS MODE and the CONTROL MODE.
• The STATUS MODE indicates the input and the output status.
• The CONTROL MODE allows selecting and adjusting the parameters.

6-2. LCD CONTROL BUTTONS

The LCD screen is controlled by 3 buttons:
knob:
EXIT MENU button:
ENTER button:

6-3. STATUS MODE

When switching ON the device, the LCD screen shows the product's name and status as follows:
PRODUCT NAME
PRODUCT MODEL
DEVICE VERSION
OUTPUT FORMAT
OUTPUT RATE
SELECTED INPUT
PRE-SELECTED INPUT
™
& REMOTE KEYPAD LCD SCREEN DESCRIPTION
To scroll thru the different menus.
• From the STATUS MODE, press on this button to display the CONTROL MODE.
• From the CONTROL MODE, press on this button to:
- return to the previous menu without safeguarding the item.
- return to the STATUS MODE (press several times).
• From the STATUS MODE, press on this button to display the CONTROL MODE.
• From the CONTROL MODE, press on this button to confirm a selected item.
REMOTE KEYPAD
RK8022 V_._
OUTPUT XGA
internal rate 60Hz
MAIN = 3
XGA 40.6K / 60Hz
PREVIEW = 5
SXGA 64K / 60Hz
DEVICE STATUS MENU
OUTPUT STATUS MENU
SELECTION STATUS MENU
PRE-SELECTION STATUS MENU
PAGE 43