Main & Preview Outputs; Communication Ports & Tally Outputs - Analog way Centrix CTX8022 Manuel Utilisateur

Chapter 7 : TECHNICAL SPECIFICATIONS (continued)
7-1. COMPUTER & VIDEO INPUTS (continued)
• COMPOSITE VIDEO:
Connectors:
Standard:
Level:
Impedance:
• DIGITAL COMPUTER (DVI) INPUT (CTX8022-D, EVX8022-D & EVX8022HD-D models only):
Connector:
Format:
Resolution:
• SDI (CTX8022-D, EVX8022-D & EVX8022HD-D models only):
Connector:
Signal:
Impedance:
• HD15 PIN ASSIGNMENT
SIGNAL COMPUTER (analog)
PIN 1 RED.
PIN 2 GREEN.
PIN 3 BLUE.
PIN 6 RED return.
PIN 7 GREEN return.
PIN 8 BLUE return.
PIN 10 GND.
PIN 13 H sync or C sync (S).
PIN 14 V sync.
7-2. MAIN & PREVIEW OUTPUTS
Connectors: HD15 female.
Levels:
Impedance: R, G, B = 75 ohms.
7-3. COMMUNICATION PORTS & TALLY OUTPUTS
• REMOTE RS-232 (on DB 9 female connector)
Level:
Data Rate:
• TALLY OUT (on DB 9 female connector)
Rating:
• LAN (on RJ45 connector)
Protocol:
Data Rate:
LED functions (on RJ45 connector):
PAGE 60
BNC female (inputs #1 to #4) or HD15 female (inputs #5 to #8).
PAL / SECAM: 15.625 kHz - 50 Hz - 625 lines.
NTSC (3.58 MHz / 4.43 MHz): 15.735 kHz - 60 Hz - 525 lines.
1 Vp/p (0.7 V Luma + 0.3 V Sync.).
75 ohms.
DVI-I female.
Digital Visual Interface (DVI)-TMDS single link.
Up to 1600 x 1200 @ 60Hz BR (reduced blanking).
BNC female.
270 Mbps serial digital input conforming to SMPTE 259M.
75 ohms.
RGB/S VIDEO
RED.
GREEN.
BLUE.
RED return.
GREEN return.
BLUE return.
GND.
C sync (S).
R, G, B = 0.7 Vp/p.
Sync.: Separate H & V = TTL.
Composite = TTL.
SOG = 0.3 Vp/p.
RS-232.
9600 Bauds, 8 data bits, 1 stop bit,
no parity bit, no flow control.
20 Vdc MAX, 50 mA MAX (open collector).
UDP (User Datagram Protocol) or TCP (Transmission
Control Protocol).
10 / 100 Mbps.
YUV & HDTV (analog)
Cr / Pr. C (chrominance).
Y. Y (luminance).
Cb / Pb.
Cr / Pr return. C return.
Y return. Y return.
Cb / Pb return.
DB9 Female
connector
Top LED Bottom LED
OFF
OFF
ON
CENTRIX™ & EVENTIX™
S.VIDEO (Y/C) COMPOSITE VIDEO
VIDEO (NTSC, PAL...)
return.
5
10
15
11
HD15 female connector of the device.
PIN # FUNCTION
1 tally # 1
2 Tx (transmit data)
3 Rx (receive data)
4 reserved for manufacturer
5
6 tally # 2
7
8 reserved for manufacturer
9 tally # 3
OFF
ON 100 BASE-T link.
OFF 10 BASE-T link.
1
6
Ground
NC
Meaning
No link