Chapter 5 : Lcd Screen Description - Analog way OCTO-PLUS Manuel Utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

OCTO range

Chapter 5 : LCD SCREEN DESCRIPTION

5-1. INTRODUCTION
The LCD screen is composed of 2 modes: the STATUS MODE and the CONTROL MODE.
• The STATUS MODE indicates the input and output status of the OCTO.
• The CONTROL MODE allows selecting and adjusting the parameters of the OCTO.
5-2. CONTROL BUTTONS
The LCD screen is controlled by 2 buttons and 1 knob:
knob:
EXIT / MENU button:
ENTER button:
5-3. STATUS MODE
When switching ON, the LCD SCREEN shows the product's name and reference as follows:
DEVICE NAME
DEVICE VERSION
SEAMLESS MODE or FAST SWITCHING MODE (OUTPUT RATE).
OUTPUT FORMAT.
OUTPUT FRAME RATE.
SELECTED INPUT (DISPLAYED).
INPUT FORMAT OR INPUT STANDARD.
INPUT LINE / FRAME FREQUENCY.
• In the STATUS MODE, turns this knob to adjust the Master volume.
• In the CONTROL MODE, turn this knob to scroll thru the different menus.
• In the STATUS MODE, press this button to display the CONTROL MODE.
• In the CONTROL MODE, press this button to:
- return to the previous menu without safeguarding the selection.
- return to the STATUS MODE (press several times).
• From the STATUS MODE, press this button to display the CONTROL MODE.
• From the CONTROL MODE, press this button to confirm a selected item.
OCTO-FADE
Version _._
OUTPUT
intern rate
INPUT # 1
SVGA
37.9 K / 60Hz
XGA
60 Hz
DEVICE STATUS
OUTPUT STATUS
INPUT STATUS
PAGE 17

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Octo-logoOcto-fadeOcto-fxOcp802Olg802Ofd802 ... Afficher tout

Table des Matières